Random Co-polymer
MFR (230°C/ 2.16 kg): 40 g/10min

Advance 400^® Polypropylene Resin is a random co-polymer developed for thin-wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures.

Advance 400^® Polypropylene Resin contains an antistatic additive.

Impact Copolymer
MFR (230°C/2.16 kg): 1.4 g/10min

Safron^® C142-01N Polypropylene Resin is a nucleated high impact copolymer specially suited for the twin walled sheet market where its good compressive strength, combined with flexibility for easy stamping out of complex shapes, renders it useful for a wide application area. It is also suitable for profile extrusion.

Safron^® C142-01N Polypropylene Resin can also be used for the injection moulding of technical parts and thick wall applications requiring exceptional toughness especially at low temperatures.

Impact Copolymer
MFR (230°C/ 2.16 kg): 7.5 g/10min

Safron^® C722-07NA Polypropylene Resin is a nucleated impact copolymer with high impact strength, good flow and a narrow molecular weight distribution used for general purpose complex injection moulding applications where toughness is required. The narrow MWD leads to a high dimensional stability in complicated articles.

Safron^® C722-07NA Polypropylene Resin contains an antistatic additive.

Impact Copolymer
MFR (230•C/2.16 kg): 25 g/10min

Safron^® C740-25RNA Polypropylene Resin is a nucleated impact copolymer suitable for thin walled containers requiring impact performance. It is characterized by high impact properties and is produced using controlled rheology allowing for a narrow MWD (molecular weight distribution). This imparts dimensional stability to mouldings.

Safron^® C740-25RNA Polypropylene Resin contains an antistatic additive.

Impact Copolymer
MFR (230°C/2.16 kg): 15 g/10min

Safron^® C765-15NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. It has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength which is maintained even at low temperatures.

Safron^® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive.

Natural Polypropylene Impact Copolymer
MFR (230°C/2.16 kg): 90g/10min

Safron^® C790-90RNA Polypropylene Resin is a high performance impact copolymer with a very high melt flow rate. Safron• C790-90RNA is designed for the thin wall injection moulding, especially multiple cavity moulds with long flow paths and allows for easy processing, short cycle times and good dimensional stability.

Safron^® C790-90RNA Polypropylene Resin contains an antistatic additive.

Homopolymer
MFR (230°C/2.16 kg): 2.0 g/10min

Safron^® H106-02NSA Polypropylene Resin is a grade designed specifically for carbonated closure applications. The material is highly nucleated offering fast cycle times and also contains slip and antistatic additives. It exhibits a combination of high stiffness and toughness properties, as well as outstanding processing characteristics.

Safron^® H106-02NSA Polypropylene Resin may also be used for selected injection moulding applications other than closures.

Homopolymer
MFR (230°C/2.16 kg): 12 g/10min

Safron^® H504-12M Polypropylene Resin is recommended for the spinning of staple fibre in the range 2 • 25 denier. It is also used for the manufacture of BCF yarns.

Safron^® H504-12M Polypropylene Resin is a medium to high flow injection moulding grade for applications where rigidity and fast cycle times are essential.

Homopolymer
MFR (230°C/2.16 kg): 2.0 g/10min

Safron^® H510-02 Polypropylene Resin is a homopolymer suitable for extrusion, general purpose injection and blow moulding. It offers good processability and low water carry-over, required when water baths are used during processing.

Safron^® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.

Homopolymer
MFR (230°C/2.16 kg): 3.3 g/10min

Safron^® H511-03 Polypropylene Resin is a homopolymer developed for the production of slit film tapes. It offers excellent processability and low water carry-over.

Safron^® H511-03 Polypropylene Resin is also suitable for the production of water quenched blown film and monofilaments.

Homopolymer
MFR (230°C/2.16 kg): 12 g/10min

Safron^® H707-12NSM Polypropylene Resin is a medium to high flow homopolymer developed for injection moulding. It is nucleated for applications requiring higher rigidity and allows for faster cycles.

Furthermore Safron^® H707-12NSM Polypropylene Resin is formulated for easy de-moulding and contains a slip additive.

Homopolymer
MFR (230°C/2.16 kg): 6.0 g/10min

Safron^® H713-06 Polypropylene Resin is a medium flow homopolymer for general purpose injection moulding.

The additive package renders Safron^® H713-06 Polypropylene Resin suitable for UV stabilisation with hindered amine light stabiliser systems.