A High Density Polyethelene Resin suitable for Compression Moulding applications.
Safrene^® E 4055 has excellent mechanical strength, toughness, optimum viscosity (flow) and excellent Environmental Stress Cracking Resistance (ESCR) properties. It is especially suitable for the production of carbonated soft drink closures.

Compression Moulding Applications
MFR (190°C/5kg): 1.5 g/10min
MFR (190°C/2.16kg): 0.3 g/10min
Density: 0.957 g/cm3

Safrene^® E 5560 High Density Polyethylene Resin is designed for compression moulding applications. Having excellent mechanical strength, toughness, environmental stress-crack resistance and good processability, it is especially suitable for the production of carbonated soft drink closures.

Blow Moulding Applications
MFR (190°C/5kg): 1.7 g/10min
Density: 0.950 g/cm3

Safrene^® F 7650 High Density Polyethylene Resin is a medium molecular mass grade with good processing properties. It exhibits good impact strength and environmental stress-crack resistance.

Safrene^® F 7650 High Density Polyethylene Resin is recommended for all general purpose applications up to 20 litre in volume.

Blow Moulding Applications
MFR (190°C/5kg): 1.4 g/10min
Density: 0.958 g/cm3

Safrene^® H 4765 High Density Polyethylene Resin is a bimodal medium molecular mass grade with good processing properties.

Safrene^® H 4765 High Density Polyethylene Resin is recommended for small part blow moulding applications where good impact, excellent stiffness and environmental stress-crack resistance are required.

High Density Polyethylene Resin is a bimodal high molecular weight grade specifically designed for extrusion blow moulding of containers greater than 100 litres in volume.

Safrene^® M 5650 High Density Polyethylene Resin exhibits outstanding impact strength, high rigidity, and excellent environmental stress-crack resistance. It is an approved grade for UN required applications and is particularly suitable for drum applications between 100 and 2000 litres and satisfies the requirements of SABS 1176 for the transportation of dangerous goods.

Blow Moulding and Extrusion Applications
MFR (190°C/5kg): 0.20 g/10min
Density: 0.953 g/cm3

Safrene^® M 6650 High Density Polyethylene Resin is a high molecular mass grade specifically designed for extrusion blow moulding of containers greater than 20 litre capacities. It has a high melt viscosity and is primarily recommended for use on modern generation equipment.

Safrene^® M 6650 High Density Polyethylene Resin exhibits outstanding impact strength, high rigidity and good environmental stress-crack resistance. It is particularly suitable for drum applications between 50 and 250 litre and satisfies SABS 1176 requirements for the transportation of dangerous goods.

High Density Polyethylene Resin is a high molecular weight grade which exhibits high stiffness, good melt strength, easy processing and excellent impact resistance.

Blow Moulding and Extrusion Applications
MFR (190°C/5kg): 0.35 g/10min
Density: 0.953 g/cm3

Safrene^® M 7650 High Density Polyethylene Resin is a high molecular mass grade suitable for extrusion blow moulding of containers greater than 20 litre capacities. It has a high rigidity and hardness with very good impact strength and environmental stress-crack resistance properties.

Safrene^® M 7650 High Density Polyethylene Resin is primarily designed for the blow moulding of large hollow articles but may be used for smaller mouldings where exceptional environmental stress-crack resistance and impact strength are required.

Blown Film Applications
MFR (190°C/5kg): 0.30 g/10min
Density: 0.953 g/cm3

Safrene^® M 9255F High Density Polyethylene Resin is a high molecular mass grade which exhibits high stiffness and excellent impact resistance at low gauges. It processes well on most modern generation extruders and can be drawn down as low as 5 micron.

Extrusion Applications
MFR (190°C/5kg): 1.5 g/10min
Density: 0.947 g/cm3

Safrene^® F 7740F3 Density Polyethylene Resin is a medium molecular mass extrusion grade ideally suited to the extrusion and subsequent knitting of tapes and monofilaments typically used in agricultural pockets and shade netting.

Safrene^® F 7740F3 Density Polyethylene Resin is also used for film extrusion applications where excellent roll geometry is required. As a film it exhibits an excellent barrier to moisture.