Description: Injection Moulding Applications MFR (190•C/5kg): 11 g/10min Density: 0.949 g/cm3 Safrene D 7255 High Density Polyethylene Resin is an injection moulding grade with good mechanical strength, high stiffness, good environmental stress-crack resistance and low distortion tendency. It is particularly suitable for durable thick walled articles. Typical Applications • Open crates • Refuse bins • Open drums […]

Description: Blow Moulding Applications MFR (190•C/5kg): 1.7 g/10min Density: 0.950 g/cm3 Safrene• F 7650 High Density Polyethylene Resin is a medium molecular mass grade with good processing properties. It exhibits good impact strength and environmental stress-crack resistance. Safrene• F 7650 High Density Polyethylene Resin is recommended for all general purpose […]

Description: Blow Moulding Applications MFR (190•C/5kg): 1.4 g/10min Density: 0.958 g/cm3 Safrene• H 4765 High Density Polyethylene Resin is a bimodal medium molecular mass grade with good processing properties. Safrene• H 4765 High Density Polyethylene Resin is recommended for small part blow moulding applications where good impact, excellent stiffness and […]

Description: Blow Moulding and Extrusion Applications MFR (190•C/5kg): 0.20 g/10min Density: 0.953 g/cm3 Safrene• M 6650 High Density Polyethylene Resin is a high molecular mass grade specifically designed for extrusion blow moulding of containers greater than 20 litre capacities. It has a high melt viscosity and is primarily recommended for […]

Description: Blow Moulding and Extrusion Applications MFR (190•C/5kg): 0.35 g/10min Density: 0.953 g/cm3 Safrene• M 7650 High Density Polyethylene Resin is a high molecular mass grade suitable for extrusion blow moulding of containers greater than 20 litre capacities. It has a high rigidity and hardness with very good impact strength and environmental stress-crack resistance properties. Safrene• M […]

Description: Blown Film Applications MFR (190•C/5kg): 0.30 g/10min Density: 0.953 g/cm3 Safrene• M 9255F High Density Polyethylene Resin is a high molecular mass grade which exhibits high stiffness and excellent impact resistance at low gauges. It processes well on most modern generation extruders and can be drawn down as low […]

Description: General Extrusion Applications MFR (190•C/5kg): 1.7 g/10min Density: 0.946 g/cm3 Safrene• F 7740F2 High Density Polyethylene Resin is a medium molecular mass extrusion grade ideally suited to the extrusion and subsequent knitting of tapes and monofilaments typically used in agricultural pockets and shade netting. Safrene• F 7740F2 High Density Polyethylene Resin is also […]

Description: Compression Moulding Applications MFR (190•C/5kg): 1.5 g/10min MFR (190•C/2.16kg): 0.3 g/10min Density: 0.957 g/cm3 Safrene• E 5560 High Density Polyethylene Resin is designed for compression moulding applications.  Having excellent mechanical strength, toughness, environmental stress-crack resistance and good processability, it is especially suitable for the production of carbonated soft drink closures. Typical Applications […]

Description: Pipe and Extrusion Applications MFR (190•C/5kg): 0.30 g/10min Density: 0.957 g/cm3 iMPACT 100 is a black High Density Polyethylene Resin suitable for all dimensions of PE100 piping where transportation of potable water, irrigation, effluent, slurry and certain chemical substances is required. It is a high molecular mass grade with […]

Description: Injection Moulding Applications MFR (190•C/5kg): 23 g/10min Density: 0.957 g/cm3 Safrene• C 7260 High Density Polyethylene Resin is an injection moulding grade with high flow characteristics, good mechanical strength, high stiffness and low distortion tendency. Typical Applications • Bottle and other storage crates • Buckets and lids Technical Data sheet Food Contact Compliance […]