Close

Monthly Archives: July 2018

Safrene F 7650

Description: Blow Moulding Applications MFR (190•C/5kg): 1.7 g/10min Density: 0.950 g/cm3 Safrene• F 7650 High Density Polyethylene Resin is a medium molecular mass grade with good processing properties. It exhibits good impact strength and environmental stress-crack resistance. Safrene• F 7650 High Density Polyethylene Resin is recommended for all general purpose […]

Read More

Safrene H 4765

Description: Blow Moulding Applications MFR (190•C/5kg): 1.4 g/10min Density: 0.958 g/cm3 Safrene• H 4765 High Density Polyethylene Resin is a bimodal medium molecular mass grade with good processing properties. Safrene• H 4765 High Density Polyethylene Resin is recommended for small part blow moulding applications where good impact, excellent stiffness and […]

Read More

Safrene M 6650

Description: Blow Moulding and Extrusion Applications MFR (190•C/5kg): 0.20 g/10min Density: 0.953 g/cm3 Safrene• M 6650 High Density Polyethylene Resin is a high molecular mass grade specifically designed for extrusion blow moulding of containers greater than 20 litre capacities. It has a high melt viscosity and is primarily recommended for […]

Read More

Safrene M 7650

Description: Blow Moulding and Extrusion Applications MFR (190•C/5kg): 0.35 g/10min Density: 0.953 g/cm3 Safrene• M 7650 High Density Polyethylene Resin is a high molecular mass grade suitable for extrusion blow moulding of containers greater than 20 litre capacities. It has a high rigidity and hardness with very good impact strength and environmental stress-crack resistance properties. Safrene• M […]

Read More

Safrene M 9255F

Description: Blown Film Applications MFR (190•C/5kg): 0.30 g/10min Density: 0.953 g/cm3 Safrene• M 9255F High Density Polyethylene Resin is a high molecular mass grade which exhibits high stiffness and excellent impact resistance at low gauges. It processes well on most modern generation extruders and can be drawn down as low […]

Read More

Safrene F 7740F2

Description: General Extrusion Applications MFR (190•C/5kg): 1.7 g/10min Density: 0.946 g/cm3 Safrene• F 7740F2 High Density Polyethylene Resin is a medium molecular mass extrusion grade ideally suited to the extrusion and subsequent knitting of tapes and monofilaments typically used in agricultural pockets and shade netting. Safrene• F 7740F2 High Density Polyethylene Resin is also […]

Read More

Safrene E 5560

Description: Compression Moulding Applications MFR (190•C/5kg): 1.5 g/10min MFR (190•C/2.16kg): 0.3 g/10min Density: 0.957 g/cm3 Safrene• E 5560 High Density Polyethylene Resin is designed for compression moulding applications.  Having excellent mechanical strength, toughness, environmental stress-crack resistance and good processability, it is especially suitable for the production of carbonated soft drink closures. Typical Applications […]

Read More

iMPACT 100

Description: Pipe and Extrusion Applications MFR (190•C/5kg): 0.30 g/10min Density: 0.957 g/cm3 iMPACT 100 is a black High Density Polyethylene Resin suitable for all dimensions of PE100 piping where transportation of potable water, irrigation, effluent, slurry and certain chemical substances is required. It is a high molecular mass grade with […]

Read More

Advance 400

Random Co-polymer MFR (230 •C/ 2.16 kg): 40 g/10min Advance 400 Polypropylene Resin is a random co-polymer developed for thin-wall injection moulding applications. It is a controlled rheology grade characterized by excellent optical properties, improved yellowness index and a good balance of stiffness and impact strength at ambient temperatures. Advance […]

Read More

Safron H713 – 06

Homopolymer MFR (230•C/2.16 kg): 6.0 g/10min Safron• H713-06 Polypropylene Resin is a medium flow homopolymer for general purpose injection moulding. The additive package renders Safron• H713-06 Polypropylene Resin suitable for UV stabilisation with hindered amine light stabiliser systems. Typical Applications • Caps and closures • Domestic Ware • Selected industrial […]

Read More